Suppose you own a water softener, then you must know how to drain a water softener resin tank. Sometimes the water softener stops working if the water is loaded too much on it. Moreover, you have to ensure the proper functioning of the water softener. The softener will only function correctly only if you have enough resin beads.
However, too much quantity of water will not let the softener function correctly. In fact, the salt gets stuck at the bottom, due to which it requires draining as well. Below we will elaborate on the methods that you can use on how to drain a water softener fully.
So let’s delve into it!
Solutions on How To Drain A Water Softener Resin Tank?
There are some methods that will let you drain the water softener resin tank, including these:
1. Use A Bucket:
You have to take out all the water from the water softener. Moreover, you have to take out the clean water from the water softener as well. Now you have to scoop all the water in a tub and store it to put back later.
2. Use A Wet-Dry Vacuum:
Suppose you don’t want to take out all the water by hand, then you can use a wet-dry cleaner or vacuum. You will find this vacuum by the name of a shop vac. Also, you can comfortably take out all the water and wash the brine tank.
The vacuum is ideally made to suck the water and other dry items as well. For instance, you will have the most convenient sucking with the shop vac. Moreover, you will have the best kind of vacuum to keep the dry items safe from moisture. It will be helpful in maintaining the other objects of your home as well. You will have the two-in-one functioning, and it will be perfect for wet and dry items.
3. Junkyard The Water:
You can junkyard the water and drain it easily by removing the brine completely. For instance, the long cylinder of the brine tank includes a safety float as well. Furthermore, you can easily take out the float and then take apart the whole overflow, and now you can pull out the cylinder easily.
More than that, the water in the softener can be side by side, and you have to disconnect the tube that is connected with the brine tank. It is crucial to remove the cylinder, and you have to remove the safety float from the brine tank before dumping the water.
4. Do A Physical Regeneration Cycle:
If the water includes manual regeneration, you can easily activate the manual regeneration by its button. You have to press the button of the regenerate and take out the water from the softener.
In addition, you will have the automatic regeneration to suck out all the water, and you have to activate the cycle to remove the water. In fact, there would be a quick regeneration once you have to push the button of regeneration. You have to skip the recycling and regeneration of the brine cycle.
Suppose the brine tank is empty, then you can skip to push the button and return it to the condition of normal water softener functioning. On the other side, you will have the regeneration occurring correctly if the water softener regeneration function is right.
Consequences If The Water Softener Isn’t Drained Correctly
First of all, the water softener will not function properly. You have to check if the functioning is drained in the whole regeneration cycle. You will have the eventual fill-up of the water softener unless there is not a safe floating option.
More to be likely, you have to check the saltwater solution for your brine tank. In addition, you need to check if the water softener is diluted or not. Your unit will not regenerate properly, and it won’t be functioning correctly to soften the water. Thus, you will have the same quality of water, and it will be hard.
What Causes A Water Softener To Be Full Of Water?
There are several causes that can fill up the water softener with water.
- If the water softener’s brine tank is leaky or plugged, then you have to remove the drain line. Also, you will need the assistance of a professional to repair it for you.
- You have to check if the brine is attached correctly with the float or not. The water will be flowing into the tank, and it won’t shut off correctly.
- The brine line might not connect, due to which the floating mechanism won’t function correctly. Also, the water will not be flowing if the valve is not shut off.
- You have to check the drain line flowing control if it is clogged or not. The clogging will not be letting the regeneration happen correctly. Further, the clogging will be simplest to clean by removing the resins from the brine tank.
- You can draw the brine out of the tank. Also, you have to check if the right amount of brine is present in the tank after removing the clogging.
- You need to check the salt clogging and ensure that nothing can stop the water flow from the water tank.
- There are chances that the safety float is stuck with the valve, due to which the valve won’t shut off completely.
- The injector should not have salt over it because it will push the water to overflow. You have to check if there is any necessary suction for the water softener in the tank.
Regular cleaning can easily prevent the water softener from working correctly. There won’t be any clogging issues, and the water will not get filled in the water softener’s tank.
Prevention of Water Getting Filled In The Water Softener
The complete cleaning of the water will remove the components from the water softener. For instance, you have to check out the following things about your water softener. The preventive maintenance should be done at reasonable rates.
- The water softener diagnostic check includes the valve, seals, updates, wireless sync, test, and settings.
- Water softener cleanout should include the clean salt tank, salt bridge removal, sanitization, and clean venture.
- The ultraviolet light replacement is another important thing to change in your water softener.
- You will have a big blue filter replacement.
- The resin bed cleanout is another essential thing. You will have the built-up of contaminants, and it can cause malfunctioning of the water softener.
- Regular tuning is important, and there will be several replacement parts, so the resin doesn’t get stuck in it. You have to change the resins with the new patch if they are stuck onto the walls of the brine tank.
Is It Possible To Clean The Water Softener With Bleach?
It is possible to clean the water softener with bleach. However, the exposure of the bleach should not be much high, and you have to check out the damage’s in the resin exchanging capacity. For instance, you will have the bleach with the neutralizing and fouling bacteria removed in this way.
You will be able to easily sanitize the bleach with your system easily. Also, you should not increase the bleaching capacity. For instance, the bleach should be 50 to 100 mg/l. On the other side, the strong concentrations will be degrading the water softener resin tank.
And the worst thing? The prolonged exposure of the water softener with bleach can eventually make the resin powerless. Plus, the people with chlorinated municipal require the carbon filter to DE-chlorinate the whole unit until it reaches the water softener.
How To Remove Iron From The Water Softener?
- Firstly, you have to dissolve the rust out ½ gallons of the cold water.
- You have to pour the solution into the brine well and ensure that you can pour the brine tank directly into the solution.
- Ensure that the water softener is empty, and now you can add the resin cleaner to it. Also, you have to check if the water salt levels are low or not.
- The immediate regeneration cycle will happen by the control valve. You have to check if the water softener will be flushing out the rust out completely with the mineral tank or not.
- Now wash the rust and other iron particles that are down in the drain.
- You must check the taste and color of the water. The discoloration of water will not provide the correct taste of water.
- Furthermore, you have to continue the process of regeneration. The water will be coming out of the water tank. You have to ensure there is no heavy iron build-up on the sides of the tank.
Thanks For Reading!
Born in the Philippines, Joseph Solis Moved to Canada at age 6. He attended Simon Fraser University and received his Masters’s in Chemistry. His research domains include water filtration, water softening, and overall water treatment.