If you are a DIYer and this is your first time installing a water softener then you might have some questions. Sometimes you might be worried about How long does it take to install a water softener.
Installing a water softener will take mostly 2 to 3 hours depending on your understanding and skill level. However, if this is your first time and you don’t have any prior knowledge then sometimes it may take longer than that.
In order to fully understand how long does it take to install a water softener there are some facts that you need to know. In this article, we’ve explained all the factors that may reduce or speed up the water softener installation process.
Sometimes it may take longer while on some occasions it can be completed within a few hours.
Understanding How Long Does It Take To Install A Water Softener?
Before you start installing your new water softener, there are few things that you should know first. First of all, you need to understand the system’s setup and cycle so that you can install it efficiently. Only after you’ve understood the system’s working you will be able to install it perfectly.
In all, you have to understand how your softener works and where the water enters and exits from the system. Since this is a DIY project, you can’t rely on any information given by your supplier or manufacturer because they don’t always provide proper information.
So, make sure to read the manufacturer’s manual and if you can’t understand anything then seek help from a professional plumber.
Finally, once you have completed installing your water softener it is important that you test the system completely. Once done, check whether any leaks are present or not and check for a proper working condition of all the parts.
After you’ve successfully completed all the tests, you can now enjoy the benefits of your new water softener.
Understanding The Factors That Affect The Water Softener’s Installation Time
There are many factors that may affect the time required for installing a water softener and it also depends on each person. If you are experienced then installation will take a few hours. But if not, it might take longer. Here are some factors that affect water softener installation:
One of the most important factors is to get the perfect size for your system because if the size is not suitable then you might face some issues. Usually, most of the manufacturers provide an appropriate size but if not then you can go for custom-made water softeners.
Copper vs Plastic:
Usually, people prefer to install copper piping because it is more durable and provides high-quality water. Also, installing with plastic is easy but its durability is weak.
If you are planning to install a large system then it is better to go for copper piping because it ensures easy installation, provides high-quality water, and is much more durable than plastic.
The process of installing a water softener might take longer if you don’t have much knowledge about the machine. It is important that once you’ve completed measuring the space, you should start installing it.
Since this is your first time and you’re not an expert plumber then you might face some issues while installing it. For example, if you don’t measure the required space before installation then it might take longer because you may have to adjust the machine more than once for proper installation.
Quality of The Machine:
Usually, it all comes down to the quality of the machine that you are choosing because if it is of low quality then you might face some issues. Always make sure to buy a good quality water softener for your home because it will help in maintaining high-quality water and provide more efficient services.
Do I Need A Plumber To Install A Water Softener?
Yes, it is always better to hire a professional plumber for water softener installation because they are experienced and aware of the machine. Since this is not an easy task for anyone so you can’t do it yourself.
But, if you want to save some money then you can go for DIY installation but make sure that you have the required knowledge and skills because if you don’t then it is better to hire a professional.
A water softener system installation will take a few hours only but the time taken varies from person to person. If you have some experience maybe 2 hours otherwise 4-5 hours.
Water Softener Installation
First of all, before installing the softener, you need to purchase the equipment needed for installation. Some of this equipment includes:
- Softener unit
- Salt tank
- Sensor probe
- Water meter (optional)
- Drain line (optional)
- Pipes and fittings (depending on your preferred piping material)
- Accessory wall bracket (optional)
The Installation Process
After purchasing the equipment, it is time to start with water softener installation. Here are some steps that you can follow in order to install a home water softener:
- First of all, make sure that there is enough space in your basement or any other suitable place where you can install the water softener system.
- After measuring the required space, next is to plan how you are going to connect your plumbing with this unit – either copper or plastic piping. If it is a salt-type water softener then you need some extra space for brine tank installation.
- Place the water softener system in the desired location and install it.
- Connect your water pipes with the unit and plumb brine line (if you’re using this type). Make sure to use a small orifice for this connection. Also, make sure that there is no leakage in between these connections.
- Make electrical power supply available for salt tank or brine tank.
- After connecting the water softener to the power supply, turn on the unit and check for leaks in between connections. If there are leaks then fix them accordingly.
- Also, make sure that the system is giving you correct measurements of hardness in your water. If it is not correct then you can calibrate it. If you are not able to fix the problems then contact a technician for help.
Testing The Installation
After completing the water softener installation, now it’s time for testing your machine. This process may include flushing your system with fresh water, running softened water through taps or toilets, and so on.
By doing this, you can check for leaks and the proper functionality of the softener. If you see issues, or if your system is not working well then contact a technician for help.
The last step in the water softener installation process is to add salt pellets in the brine tank according to the manufacturer’s instructions. These salt pellets will dissolve when the unit starts producing softened water that slowly fills the tank.
For Salt Type Water Softeners
For salt-type water softener, it is necessary to change the salt every few weeks depending on your usage.
If there are any leaks of brine in between connections then you need to fix them immediately because these leaks might cause corrosion problems and may damage your appliance too.
Water softener installation can be done by anyone if they have the required knowledge and skills.
How Long Does it Take to Install a Water Softener? Water softener installation will take a few hours only but the time taken varies from person to person. If you have some experience maybe 2 hours otherwise 4-5 hours.
However, if you hire a professional then they can do it within an hour or so depending on your water hardness and softening requirements.
In addition, always make sure that you follow the instructions given in the user manual carefully. This will help you to get your softening system running properly without any issues.
The installation process is simple and by following the above steps, you can surely install a water softener easily or can hire technicians for professional help. You can also read our other articles on water softeners.
Thanks For Reading!
Born in the Philippines, Joseph Solis Moved to Canada at age 6. He attended Simon Fraser University and received his Masters’s in Chemistry. His research domains include water filtration, water softening, and overall water treatment.